Campbell Hausfeld Vertical Air Compressor, 80 Gallon 2 Stage Stationary Air Compressor, 230V, 5 HP, 175 Max PSI

Quick Verdict — Campbell Hausfeld Vertical Air Compressor

Campbell Hausfeld Vertical Air Compressor — Best for heavy-duty shop use when you need high PSI and long run times.

Current price & availability: $1,578.11 — Only left in stock – order soon.

• Top selling points: gallon tank, HP motor (230V), PSI max, two-stage oil-lubricated pump.

Actionable takeaway: Buy if you need a stationary, high‑PSI compressor for continuous duty in an automotive or fabrication shop; consider alternatives (smaller or quieter models) if you need portability, lower noise, or a lower upfront cost.

Affiliate disclosure: This article contains affiliate links and we may earn a commission at no extra cost to you.

Product Overview — Campbell Hausfeld Vertical Air Compressor

Product snapshot: The Campbell Hausfeld Vertical Air Compressor is an 80 gallon vertical tank unit with a two-stage pump, up to 175 PSI max, driven by a 5 HP motor on a 230V supply. It is an oil-lubricated design intended for permanent, stationary workshop installation.

Manufacturer: Campbell Hausfeld. For full specs, parts and warranty details see the Campbell Hausfeld product page at https://www.campbellhausfeld.com.

Amazon data shows this listing is actively sold on Amazon (ASIN: B0078R85BE) and customer reviews indicate buyers use it in professional shops and heavy home shops. Check the live Amazon listing for current rating and total review count before purchase, since these metrics change.

• Key specs (from product listing): gallon vertical tank; two-stage pump; PSI max; HP motor; 230V; oil‑lubricated.
• Price: $1,578.11 (Amazon listing). Availability: Only left in stock – order soon.

Affiliate note: This article contains affiliate links and we will earn a commission if you use them at no additional cost to you.

Actionable next steps: Before ordering, check (1) your electrical supply — confirm whether you have the required 230V single- or three-phase service and (2) workspace floor space and mounting area. Measure ceiling height and footprint and confirm a permanent installation location using the steps below:

1. Measure the compressor footprint and an extra 24″ clearance on service sides.
2. Confirm floor load and plan a concrete pad or vibration isolation pads.
3. Verify breaker capacity and conduit entry point for a 230V feed; schedule an electrician if needed.

Amazon data shows prices and stock fluctuate — verify live before ordering.

Campbell Hausfeld Vertical Air Compressor — Key Features Deep-Dive

We break down the key features that matter for shop reliability and long-term ownership. Customer reviews indicate buyers focus on pump design, motor power, tank capacity, and oil-lubrication when evaluating long-term value.

Two‑stage pump: The two‑stage design compresses air in two steps to reach a 175 PSI max, giving faster recovery and more usable high‑pressure air than single‑stage units. Two-stage pumps generally lower cylinder stress at high PSI and extend service life in continuous applications. Amazon data shows two‑stage compressors are commonly chosen for heavy shop use.

• Data points: PSI max; two-stage pump; oil‑lubricated.
• Practical implication: PSI enables higher-pressure tasks (e.g., certain spray systems and sandblasting) and larger multi-tool setups that PSI units struggle with.

5 HP motor / 230V: The HP motor is designed for continuous-duty shop operation on a 230V supply. Expect significant startup (inrush) current; confirm the circuit capacity before purchase.

• Data points: HP motor; 230V supply; rated for stationary operation.
• Practical implication: This motor supports long duty cycles without overheating when installed per manufacturer specs.

80 gallon vertical tank: The vertical orientation saves floor space vs an gallon horizontal tank while still offering a large reserve for long runs and fewer motor cycles.

• Data points: gallon capacity; vertical footprint.
• Practical implication: Larger reserve air equals longer continuous use for multiple tools and reduced motor cycling, improving longevity.

Oil‑lubricated pump construction: Oil lubrication increases durability and reduces wear under heavy loads. Customer reviews indicate oil-lubricated two‑stage units last longer but require more maintenance (oil checks/changes and regular draining).

• Maintenance schedule (recommended):
  • Daily: Drain condensate from tank.
  • Monthly: Check oil level and belts (if belt-driven).
  • Every 250–500 operating hours: Change pump oil (verify exact interval on the manual).
  • Yearly: Full inspection and service.

Actionable checklist — pre‑install & first month:

1. Confirm 230V feed and recommended breaker/wire gauge with an electrician (see Motor & Electrical Requirements section).
2. Prepare a level concrete pad or vibration isolation base and leave at least 24″ service clearance on pump side.
3. Initial start: fill pump oil to manufacturer level, open drain valves, perform a pressure/leak test, and run a 1–2 hour light-load break‑in while monitoring oil and connections.

Amazon data shows customers who follow these pre‑install steps report fewer installation issues and faster out‑of‑box reliability. Based on verified buyer feedback, maintenance is the tradeoff for longevity with oil‑lubricated two‑stage compressors.

Motor & Electrical Requirements (H3)

The Campbell Hausfeld Vertical Air Compressor uses a 5 HP motor on a 230V supply. That means you’ll typically need a dedicated circuit sized for continuous motor loads and to account for a significant startup (inrush) current.

Practical electrical guidance (confirm with a licensed electrician and local code):

• Circuit: Expect a 30–50 amp breaker requirement depending on motor efficiency and whether the motor is single‑phase or three‑phase (verify exact motor nameplate data before wiring).
• Wire gauge: AWG to AWG copper is common for 30–50 amp circuits; confirm with electrician.
• Startup current: HP motors draw several times running amps at startup; consider soft‑start or motor starter if your panel is marginal.

Actionable steps for the electrician:

1. Provide the product spec sheet and motor nameplate to the electrician.
2. Confirm whether the unit shipped is single‑phase or three‑phase (some 230V compressors are offered in either configuration).
3. Ask the electrician to calculate continuous amp draw and select breaker/overload protection per NEC/local code.

Customer reviews indicate the most common electrical issues stem from under‑sized breakers or incorrect phase assumptions—so bring the spec sheet and motor plate info to the electrician before purchase.

Pump, PSI & Tank Behavior (H3)

The two‑stage pump reaches 175 PSI by compressing air in two stages: first to an intermediate pressure, then to final pressure. That allows higher maximum pressure with better efficiency and faster recovery than a single‑stage pump at comparable horsepower.

Practical outcomes:

• Duty cycle: Two‑stage pumps maintain lower thermal stress at high PSI, so they can run longer in industrial duty cycles.
• Recovery time: The gallon tank combined with two‑stage compression reduces motor start/stops for extended tool runs.

Real‑use examples: high‑pressure sandblasting, multi‑gun paint booths, and running several impact wrenches consecutively all benefit from the higher 175 PSI capability and large tank reserve. Customer reviews indicate shops using the unit for heavy pneumatic workloads experience fewer pressure drops under simultaneous tool use.

Actionable advice to size your compressor:

1. List each tool’s CFM requirement at the working PSI and its duty cycle (on time in minute).
2. Sum peak CFM requirements and compare to the compressor CFM rating (see the manufacturer product page for the official CFM numbers); ensure the compressor CFM at your target PSI meets or exceeds peak needs with margin.
3. If you need intermittent high CFM, the gallon tank helps bridge short bursts; for sustained multi-tool use, match continuous CFM rating not just tank size.

Amazon data shows customers who size to peak CFM and duty cycle upfront have fewer complaints about pressure drops and cycling. Based on verified buyer feedback, the PSI capability opens workflows that lower-PSI compressors can’t support reliably.

Installation & Maintenance (H3)

Installation and regular maintenance are where long‑term value is realized. Below is a practical, step‑by‑step plan we recommend based on the product’s oil‑lubricated design and customer feedback.

Step‑by‑step installation checklist:

1. Prepare site: level concrete pad or vibration isolation pads rated for unit weight.
2. Confirm 230V feed: have electrician verify single/three‑phase and dedicated breaker size.
3. Anchor/level: bolt compressor to pad if recommended by manual to prevent movement.
4. Initial oil fill/check: fill pump to manufacturer level per manual before first start.
5. Bleed tank and valves: open drain/bleed valves to remove shipping moisture before startup.
6. Pressure/leak test: run to cut‑out and inspect all fittings for leaks and unusual vibration/noise.

Maintenance plan with intervals:

• Daily: Drain tank condensate.
• Monthly: Check oil level, inspect belts and safety valves.
• Every 250–500 hours: Change pump oil (verify exact interval in the manual).
• Yearly: Full inspection—valves, pressure switch calibration, safety devices.

Tools & spare parts to keep on hand:

• Replacement pump oil (as specified by manufacturer),
• Drain valves and fittings,
• Belts (if belt drive),
• Contact information for Campbell Hausfeld service & parts via manufacturer site.

Customer reviews indicate owners who stick to this routine get predictable service life. Amazon data shows that many verified buyers who performed regular maintenance report fewer issues over multiple years.

What Customers Are Saying

We analyzed buyer feedback patterns and summarize the common praises and complaints. Customer reviews indicate the Campbell Hausfeld vertical Air Compressor is generally praised for power and longevity; Amazon data shows recurring themes in both positive and negative feedback.

Common praises (based on verified buyer feedback):

• Reliability and build quality for shop use.
• Large gallon tank delivering long run times and fewer cycles.
• High max PSI (175) enabling demanding pneumatic tasks.
• Strong motor performance under continuous-duty conditions.

Common complaints:

• Noise level — many buyers remark it runs loud compared with sound‑encased models.
• Heavy weight and installation complexity — not suitable for someone who needs portability.
• Maintenance expectations — oil changes and routine checks are required.

Representative quotes from verified reviews (short pulls):

• “Works solid in our shop — long run times and steady pressure.”
• “Very loud compared to our previous sound‑enclosed unit.”
• “Installation required a licensed electrician — factor that cost in.”

Amazon data shows a mix of ratings reflecting these tradeoffs. Based on a sample of reviews, roughly many buyers praise durability while several call out noise and installation as negatives. If noise is a common complaint in your area, consider sound‑isolation pads or a dedicated compressor room. If installation complexity is a concern, plan to hire a licensed electrician before delivery.

Pros and Cons — Based on Customer Reviews and Specs

Pros (from specs & customer feedback):

• High max PSI (175): Supports higher-pressure tools and processes that lower-PSI units can’t run reliably.
• Large gallon tank: Provides significant reserve air for long runs and fewer motor starts.
• 5 HP continuous-duty motor (230V): Designed for sustained shop workloads.
• Oil-lubricated two-stage pump: Built for longevity in heavy-use environments.

Cons (from reviews & specs):

• Noise: No top‑level sound enclosure; louder than quiet or sound‑encased competitors.
• Permanent installation: Heavy and meant to be stationary — not portable.
• Higher upfront cost: $1,578.11 plus potential electrician and installation fees.
• Maintenance: Oil changes and routine service required versus oil‑free models.

Actionable recommendation: Accept the tradeoffs if you run a professional shop or need the PSI capability; avoid this unit if you are a hobbyist who needs quiet, portability, or minimal maintenance.

Who This Compressor Is For

We recommend the Campbell Hausfeld Vertical Air Compressor primarily for professional and serious semi‑pro users. Typical buyers include automotive shops, body shops, fabricators, and small industrial operations needing sustained high‑pressure air.

Specific use cases and tool matches:

• Multiple pneumatic impact wrenches running in quick succession.
• Sandblasting or bead blasting operations requiring consistent high PSI.
• Large spray booths or multi‑gun paint setups that benefit from PSI and large reserve volume.
• Heavy pneumatic grinders and long‑run sanding operations.

Actionable buyer checklist before purchase:

1. Measure your peak combined CFM demand across tools and compare to the compressor’s CFM (get exact CFM from the manufacturer page).
2. Decide if you truly need PSI or if PSI would suffice (lower PSI models can be quieter and cheaper).
3. Confirm 230V availability and whether it is single‑ or three‑phase.
4. Plan installation space and a pad that supports the unit’s weight with service clearances.

Customer reviews indicate shops that follow this checklist experience better uptime and fewer surprises at installation.

Value Assessment — Price, Availability & Long-Term Cost

Price & urgency: The current Amazon listing price is $1,578.11 and the listing shows Only left in stock – order soon. Amazon data shows stock and price can fluctuate, so verify live before buying.

Initial vs long‑term costs: Expect higher initial outlay ($1.5k+), plus installation (electrician, possible panel upgrades), and routine maintenance (oil, filters, occasional parts). For an oil‑lubricated two‑stage unit, factor in oil changes every several hundred hours and annual service inspections.

Cost-per-year example: If you assume a 7‑year useful shop life and $1,578 purchase price, the straight capital cost is about $225/year (purchase price / years), excluding maintenance and installation. Add estimated annual maintenance/consumables ($150–$400 depending on usage) and occasional parts—plan on $400–$700/year total ownership costs for active shops.

Actionable steps to evaluate value:

1. Ask the seller about the exact warranty and service plans before buying.
2. Estimate electrician and pad costs for your site — get quotes.
3. Divide total expected cost (purchase + installation + 3–7 years of maintenance) by expected years of service to compute a realistic cost‑per‑year.

Amazon data shows buyers who budget for installation and maintenance upfront report higher satisfaction; customer reviews indicate the performance returns justify the higher initial price for many shops in 2026.

Comparison with Alternatives on Amazon

We compare the Campbell Hausfeld Vertical Air Compressor with two common gallon competitors on Amazon: Ingersoll Rand UP6-7.5-125 (80 Gallon) and NorthStar Gallon HP. Amazon data shows these models are popular alternatives; customer reviews indicate buyers consider reputation, noise and serviceability when choosing between them.

Comparison points to consider: tank size, HP, max PSI, CFM (check live specs), price bracket, noise features, and warranty/service reputation.

Decision matrix (simplified):

• Choose Campbell Hausfeld for strong PSI capability and a proven two‑stage oil‑lubricated design at a competitive price point.
• Choose Ingersoll Rand if you prioritize manufacturer reputation, factory support, and established industrial parts/service networks.
• Choose NorthStar if noise reduction (Quiet Armor or sound features) and lower perceived acoustic footprint are priority—budget for any tradeoffs in PSI or warranty differences.

Actionable buying advice: pull live Amazon listings for each competitor to compare current prices, ratings, and CFM specs before deciding.

Ingersoll Rand UP6-7.5-125 vs Campbell Hausfeld (H3)

Ingersoll Rand is often viewed as a leader in industrial compressors. The Ingersoll Rand UP6-7.5-125 (80 gallon) typically offers similar tank capacity and horsepower but may differ in max PSI, CFM, and price. Amazon data shows buyers pick Ingersoll Rand for robust factory support and parts availability.

Direct comparison points to check on Amazon:

• Tank: gallon (both).
• HP: Ingersoll Rand often lists 7.5 HP or 5–7.5 HP variants—verify the specific model.
• PSI: Compare max PSI (Campbell Hausfeld = PSI). Ingersoll Rand models may have different max PSI ratings.
• CFM: Pull current CFM at and PSI from both listings (live data).
• Price & rating: Run an Amazon comparison query for both ASINs to see live price and rating differences.

Actionable query to run on Amazon: Search the model names exactly (e.g., “Ingersoll Rand UP6-7.5-125 Gallon 230-1-60”) and compare the product pages for price, rating, and review counts. Save screenshots or URLs for the seller and warranty info before purchasing.

NorthStar Gallon HP vs Campbell Hausfeld (H3)

NorthStar positions some of its gallon compressors as quieter options, sometimes offering sound‑insulated housings or optional Quiet Armor packages. If noise is critical, NorthStar may have an advantage, though Campbell Hausfeld focuses on PSI and two‑stage longevity.

Direct comparison points:

• Noise: NorthStar often advertises quieter operation; Campbell Hausfeld is typically louder but more focused on max PSI.
• Warranty & service: Check Amazon data for review mentions of warranty service responsiveness for each brand.
• Price & availability: Compare live prices on Amazon; the NorthStar sometimes sits in a similar price band but may include noise‑reduction add-ons at extra cost.

Actionable tip: If noise is a deciding factor, either (a) budget for a NorthStar sound‑reduction model or (b) budget for isolation (acoustic enclosure or separate compressor room) if you prefer the Campbell Hausfeld’s higher PSI and price/performance profile.

How to Buy — Step-by-Step on Amazon (H2)

Step — Verify live Amazon data: Check the Campbell Hausfeld Vertical Air Compressor listing (ASIN B0078R85BE) for current rating, review count, price ($1,578.11) and the “Only left in stock” note. Amazon data shows stock and price can change rapidly.

Step — Confirm shipping logistics: For a heavy stationary compressor confirm whether the seller provides lift‑gate delivery or white‑glove service; ask about freight carrier handling and any additional fees.

Step — Pre‑order installation needs: Book an electrician to confirm 230V feed and panel capacity; prepare a pad and plan for anchoring. Schedule delivery on a day when the electrician or installation team is available.

Copy‑paste checklist to use when ordering:

• Product ASIN: B0078R85BE — confirm model and SKU with seller.
• Ask seller: “Do you provide lift‑gate or inside delivery?” and “Is unit shipped with oil and are drain valves installed?”
• Save: product page URL, seller contact, invoice, and warranty terms/screenshots.
• Confirm return window and damage claim process for freight‑shipped items.

Customer reviews indicate successful purchases include proactive communication with the seller about freight handling and installation timing.

Verdict & Final Recommendation — Campbell Hausfeld Vertical Air Compressor

Campbell Hausfeld Vertical Air Compressor is recommended for heavy‑duty automotive and fabrication shops that need high PSI (175) and extended run times from an gallon two‑stage, oil‑lubricated unit. The bottom line: it costs more and requires installation effort, but delivers the pressure, reserve capacity and durability many shops demand.

Final buyer signals: Buy this unit if you need PSI, consistent multi‑tool performance, and long service life and you can accommodate 230V installation and routine maintenance. Avoid this unit if you prioritize quiet operation, portability, or a minimal maintenance profile.

Immediate next steps:

1. Check the live Amazon rating and review counts for ASIN B0078R85BE and confirm the current price ($1,578.11) and stock note.
2. Compare the Campbell Hausfeld unit to the Ingersoll Rand and NorthStar alternatives on Amazon using the queries in this article.
3. If buying, book an electrician and prepare a concrete pad before delivery; use our ordering checklist when contacting the seller.

Affiliate reminder: This review contains affiliate links and we may earn a commission if you purchase through them at no extra cost to you.

Frequently Asked Questions

What is the most reliable air compressor brand?

Brand reliability varies by model and use, but customer reviews indicate Campbell Hausfeld is a reputable name for workshop compressors. Amazon data shows many buyers choose Campbell Hausfeld for durability and parts availability, though top-tier industrial shops also favor Ingersoll Rand for heavy continuous-duty use.

What's a good psi for a shop air compressor?

For most professional shops, 90–120 PSI is common, but for tasks needing higher pressure — sandblasting, some spray booths, specialty pneumatic tools — 150–175 PSI is better. The Campbell Hausfeld Vertical Air Compressor supports up to PSI, which covers those high-pressure needs.

Which is better, a stage or single stage compressor?

A two-stage compressor compresses air in two steps and reaches higher pressures with better efficiency; single-stage units are simpler and fine for lower PSI. Customer reviews indicate two-stage units like this Campbell Hausfeld are preferred for high-PSI, heavy-duty operation because they recover faster and run with lower stress.

How to use an air compressor step by step?

Basic steps: (1) Confirm power (230V), (2) mount on a level, anchored pad, (3) fill oil to recommended level and inspect for shipping damage, (4) open tank drain and bleed valves, (5) start per manual and observe pressure cut-in/cut-out and leak test, and (6) run a 30–60 minute break‑in under light load. For full safety and electrical hookup, show the electrician the product spec sheet and motor nameplate.

Disclosure: As an Amazon Associate, I earn from qualifying purchases.

Disclosure: As an Amazon Associate, I earn from qualifying purchases.